An attic is a great place to store old keepsakes and holiday decorations, but it can also be a large sour
Polishing a concrete floor can turn up a number of unexpected surprises. One of these surprises involves
Many people consider the kitchen to be the main focal point of their homes. It's the place where they coo
When you hear the word gravel, what do you typically think of? Large jagged chunks of rock? Pea grav
Storm preparation isn't just about boarding up windows and trying to prevent every fathomable form of dam
Every minute that water is allowed to sit on the surfaces in your home, the damage that this water can cause will continue to increase. This is why it is so important for you to take swift action to minimize the damage to your home while waiting for an emergency plumber like http://terryrossplumbing.com/ to arrive in the wake of a plumbing failure. Thankfully, the tips outlined below can help you to accomplish this task and ultimately minimize the costs associated with your plumbing emergency.
Tip: Turn Off All Water To Your Home
While it can be tempting to simply turn off the water supply at the apparent source of your plumbing problems, turning off this localized valve may not be enough to prevent further damage. This is because the water leaks that you can see, may not be the only leaks that exist. Instead, this water may simply be a symptom of a much larger plumbing problem inside your walls or beneath the foundation of your home.
In order to ensure that your home is not subjected to any further damage, it is important to turn off all water to your home by turning off the main water valve. This valve will often be located where the main water line enters your home or near your water meter at the street. If you are not familiar with the location of your main supply valve, taking the time to locate this valve prior to an emergency can save you valuable time when a plumbing emergency does occur.
Tip: Quickly Eliminate Standing Water
While some moisture will immediately soak into the furnishings and building materials inside your home, the largest volume of water will sit stagnate for an extended period of time before it is absorbed. Quickly removing this standing water will prevent further absorption, and therefore prevent further damage.
The most effective way to remove large volumes of standing water from your home is with the use of a wet/dry vac. This will allow you to quickly suck up multiple gallons of water and dispose of them through a window or door. However, if you do not have access to this equipment, towels and other household items can be used to soak up the majority of the water.
Tip: Keep The Air Moving
In order to prevent the growth of mold and mildew, you will need to allow for the evaporation of as much moisture as possible. The best way to do this is to keep the air moving so that your indoor humidity levels do not become overwhelming.
If the current humidity level outside is low, you can open the windows in your home in order to keep fresh air circulating. However, in the event of high outdoor humidity, you will want to keep these windows closed in order to avoid making the problem worse.
In addition to opening windows, you will need to turn on your central air conditioning system and any fans you may have in your home. These appliances will aid in the removal of moisture from the air and promote the absorption of any moisture that is trapped inside your furnishings, floors, ceilings, and walls.
Share